Induction machine squirrel cage

This component models a squirrel-cage induction machine. The model is based on standard DQ modeling theory and is set in the stationary reference frame. 

Connection Description
A, B, C The three-phase connection to the stator.
omega (shaft coming out of machine) The voltage on this pin represents the mechanical angular speed in rad/s. You can attach mechanical loads, sensors, or motion controllers to the motor through this pin. An external load may also be applied using appropriately connected voltage/current sources.
Te The measurement pin for electromagnetic torque. Use this pin only to probe the electromagnetic torque in N•m.

This component should only be used in transient-type simulations where Initial conditions are set to User defined.

See Induction machine squirrel cage model for simulation and parameter information.