Induction machine wound
This component is a three-phase wound rotor induction machine.
| Connection | Description |
|---|---|
| A, B, C | The three-phase connection to the stator. |
| Ra, Rb, Rc | Connections to the rotor windings. |
| shaft (shaft coming out of machine) | The voltage on this pin represents the mechanical angular speed in rad/s. You can attach mechanical loads, sensors, or motion controllers to the motor through this pin. An external load may also be applied using appropriately connected voltage/current sources. |
| Te | The measurement pin for electromagnetic torque. Use this pin to probe the electromagnetic torque in N•m. |
This component should only be used in transient-type simulations where Initial conditions are set to User defined.
See Induction machine wound model for simulation and parameter information.
